Tapping Valve Saddle
Under-pressure tapping and repeatable isolation for live networks.
Tapping valve saddles are specialised fittings used to add a new branch connection with an integral isolation valve to an existing pipeline, without disrupting the main flow.
Water and gas distribution
Tapping valve saddles are commonly used in municipal water and gas distribution networks. They allow for the installation of service lines, hydrants, or additional pipeline extensions without needing to shut down the main line, ensuring uninterrupted service.
Live Tapping
These saddles are integral to the process known as "hot tapping" or "live tapping," where a new connection is made to a pressurised system. This method is crucial for making connections or repairs without interrupting the supply, which is especially important in utilities that cannot afford downtime.
Maintenance and repairs
In systems that require regular maintenance or have a high likelihood of needing repairs, tapping valve saddles allow for quick isolation. They can be installed in advance, providing easy access for future interventions, whether planned or in emergency situations.
Industrial applications
In addition to municipal uses, tapping valve saddles are also used in various industrial applications, such as factory networks and data centres, where maintaining flow is essential during expansions or modifications.
Water and gas distribution
Tapping valve saddles are commonly used in municipal water and gas distribution networks. They allow for the installation of service lines, hydrants, or additional pipeline extensions without needing to shut down the main line, ensuring uninterrupted service.
Live Tapping
These saddles are integral to the process known as "hot tapping" or "live tapping," where a new connection is made to a pressurised system. This method is crucial for making connections or repairs without interrupting the supply, which is especially important in utilities that cannot afford downtime.
Maintenance and repairs
In systems that require regular maintenance or have a high likelihood of needing repairs, tapping valve saddles allow for quick isolation. They can be installed in advance, providing easy access for future interventions, whether planned or in emergency situations.
Industrial applications
In addition to municipal uses, tapping valve saddles are also used in various industrial applications, such as factory networks and data centres, where maintaining flow is essential during expansions or modifications.
Simplicity – Under Clamp
The tapping valve saddle is manufactured with a sacrificial quick-clamp. The quick-clamp design snaps quickly in place, saves the installer time, avoids the need for specialist tooling, provides proof of clamping during the fusion cycle and applies the right amount of force every time for a quality joint.
Second chance – Double spigot outlet
The outlet spigot on the tapping valve saddle gives the installer a ‘second chance’ – if problems occur with the initial service connection there is sufficient spigot length to cut off the coupler and fuse a second fitting.
Integrated brass bodied valve
The tapping valve saddle is manufactured utilising our leading under clamp tapping tee design complete with an integrated brass bodied valve. The integrated valve provides a reusable shutoff point which eliminates the requirement for an additional in-line valve within the service off-take.
A commitment to manufacturing excellence.
We are pleased to introduce Fusion's tapping valve saddle: engineered to the highest technical standards, ensuring both safety and performance. Constructed from virgin PE 100 polyethylene, it has been rigorously tested to ensure the initial tapping and future isolation is effective at both low and maximum stated operating pressures, making it ideal for gas and water applications. Our commitment to excellence is demonstrated by the product's compliance with international certifications such as EN and ISO, ensuring each tapping valve saddle meets stringent requirements for reliability and durability.
The tapping valve saddle is more than just a product; it’s a reflection of our dedication to delivering excellence through innovation, backed by a robust technical foundation and a customer-first approach.
Stephen Tann – Group Technical Manager
Dave Clayton – Group Technical Product Manager
A valuable addition to Fusion’s tapping range
The tapping valve saddle is a valuable addition to Fusion’s comprehensive tapping range, designed to meet the evolving demands of gas and water distribution networks. This product was created with input from our customers, who required a solution that would simplify installations without compromising on durability. The tapping valve saddle allows for efficient branch connections while ensuring high performance under pressure, delivering both reliability and ease of use. We’ve worked closely with engineers and contractors to make sure this product reduces downtime during installation and maintenance, all while maintaining the highest safety standards.
Carolina Marino – Group Product Manager
Meet our sales team ready to support your needs
Jack Barnsley
Head of Sales - Nordic, Germanic, West Europe
Igor Caturov
Head of Sales - Central, East Europe
Konrad Grzegorczyk
Senior Sales Manager - Poland North
Mateusz Barć
Area Sales Manager - Poland South
